When central air conditioners operate too much, and for too long, they frequently overheat. Overheating an air conditioner will eventually either result in an internal malfunction or trip the circuit breaker. It is important to understand the causes of an overworked and overheated central AC system.
While you may replace a dirty air filter, your best option for dealing with dirty coils and low refrigerant is to contact a qualified HVAC specialist for HVAC repair in Garden Grove, CA. A typical AC maintenance visit includes cleaning the coils and inspecting and charging the refrigerant.
Signs You Need An Air Conditioner Repair Service
Congested Air Filters
The air filters shield your air conditioners from dust, grime, and other air pollutants. It functions as a safety net that screens the air that goes through to filter out stray particles. Air filters are beneficial parts of your system, but if it fills up with dirt and dust, it becomes difficult to maintain comfort.
What occurs when your air filters become clogged? Of course, this will prevent airflow, and several issues will arise, such as overheating and system failure. You wouldn’t want these to occur in your air conditioner. As a result, you should watch out for your unit’s filters.
Dirty Condenser Coils
Give your interior and exterior components similar weight because they are vital in providing your house with enough cool air. The condenser coil is located within the outdoor unit, dispersing heat outdoors to chill the refrigerant and speed up the cooling procedure. However, as the coils get dirty, this process is hampered.
What occurs if your condenser coil is covered with dirt and dust? Since it will take a while for the refrigerants to cool, your unit will need to operate longer than necessary. Where the overheating occurs is there. To avoid this, arrange a routine condenser coil cleaning service with your reliable HVAC specialists.
Your unit’s core is refrigerants. It moves from one place to another to bring cold air into your home and collect heat. The same happens when there is insufficient refrigerant content as when the condenser coil is unclean. Your system will have to operate continuously as a result, which will eventually lead to overheating and failure.
Seek expert assistance if you experience a refrigerant issue. Leaks are the only cause of inadequate refrigerant content. Before adding the correct amount of refrigerant, make sure your technician first locates any leaks. Look for AC repair near me to get in touch with a reliable professional.
An older air conditioner may develop dust on its fan blades, even if you frequently clean the filters. Your system will contain one or more fans to circulate air, depending on the kind. On these moving components, dirt and dust eventually begin to accumulate. The fans now have more weight, which makes moving them more difficult.
It is important to set aside time to clean these blades. You can do it yourself by shutting off your machine and getting to the parts. However, some units could have fans in awkward locations. In these circumstances, you may arrange for a maintenance visit and hire a cleaner.
Fill Your Unit With Shade
In certain circumstances, direct heat on the device causes it to overheat. The east side of your outdoor unit should be facing away from the sweltering midday sun, according to most HVAC specialists. By the unit, plant a tree, shrub, or construct a fence, trellis, or vine. Ensure it is at least two feet away from your unit to avoid blocking the airflow.
Maintain The Outside Unit Properly
Many residents are unaware that their air conditioning systems have two components: the interior unit and the outside unit. When the cooling system fails, we frequently inspect the interior, giving the box little thought. The entire system can function well and cool the heated refrigerant that passes through from the interior unit.
The exterior unit’s condenser coils may accumulate a lot of dirt and debris, including twigs, pine needles, leaves, grass clippings, and more. Make sure to frequently sweep away debris and clean the coils using a solution of equal parts water and vinegar in a spray bottle to prevent this from overheating your system. Spray the solution on the coils, allow it to sit for a little while, and then rinse with water.
To Sum Up
You may significantly lower the possibility of your AC system overheating this summer and increase its performance by carrying out these straightforward steps. For AC service in Garden Grove, CA, contact Stephan’s Home Comfort Services. We provide the best HVAC services.